Pyrodura 3YO TS is een vloeistof, speciaal ontwikkeld door 3YO om de levensduur en prestaties van kammen in lasersnijmachines te verbeteren. Deze innovatieve vloeistof vermindert slakopbouw, waardoor het schoonmaakproces efficiënter wordt en bijdraagt aan een vlotter lasersnijproces. Verpakt in een gebruiksvriendelijke 1 liter fles, is de 3YO TS ideaal voor kleinere projecten en regelmatig onderhoud van uw kammen. Maximale prestaties en een langere levensduur van uw apparatuur zijn binnen handbereik met Pyrodura 3YO TS!

Pyrodura 3YO TS is a high-performance fluid, specially developed by 3YO to optimize the functionality and durability of blades in laser cutting machines. This advanced formula reduces slag buildup, simplifying maintenance and smoothing the cutting process. Packaged in a convenient 5-liter container, 3YO TS is ideal for large projects and regular blade maintenance. Enhance the performance and extend the life of your machines with Pyrodura 3YO TS!

The Pyrodura Gun is a specially designed spray gun for efficiently and evenly applying 3YO TS fluid to laser blades and combs. ! It comes without a battery and charger!

The Pyrodura Gun is a specially designed spray gun for efficiently and evenly applying 3YO TS fluid to laser blades and combs. It comes with a battery and charger!

Flexible solution for fully automatic product loading. Upgrade your finishing process and produce fully automatically with the Q-Fin Cobot. The intermediate solution between human and robot for automatic loading of small sheet metal parts in combination with the Q-Fin F250 finishing machine.

As long as parts fit perfectly together, gas cap and wire searching (Quick-Touch) are sufficient to measure deviations in the position of the weld seam so that the robot can automatically adjust it in the welding program. However, with V-, I- and raised welds, irregular pre-openings and deformations due to shrinkage or heat input, it becomes a lot more difficult and sometimes even impossible to weld these welds with the welding robot. Use of the welding robot in such cases is still no match for the speed and flexibility of an experienced manual welder. The ARC-EYE Adaptive plug-in that Valk Welding developed for its ARC-EYE CSS welding seam tracking system now changes this. ARC-EYE CSS is a laser sensor system, mounted on the robotic welding torch that registers deviations in the position of the weld seam during welding and corrects them in real time. This eliminates the need for manual program corrections and increases process speed. With the ARC-EYE Adaptive plug-in, the ARC-EYE CSS can now also be used to correct welds with larger tolerances in real time. Therefore, workpieces that could previously only be welded manually can now be welded on the robot thanks to this development.

Service to metalworking machines. Which machines? We are very clear about conventional and ProtoTRAK CNC metalworking machines, because we are really specialized in that. Which service? It could be anything. A mechanical defect such as bearings, guides, couplings, replacing spindles, replacing belts, you name it. Accuracy: we can take measurements, adjust guides or align machine elements Electrical, as long as it is not an NC or CNC control unknown to us, we can detect and solve electrical breakdowns Hydraulic and pneumatic repairs Safety, adjusting or installing new safety components. Convert, install a digital readout, change function, the possibilities are endless. What about parts? Parts of our own new machines are simple, we have close contact with the manufacturer and we also have access to a warehouse with thousands of current parts. With older used machines, there is a good chance that the manufacturer no longer exists. Here too we have built up a network through our years of experience where we can still supply parts of many brands. If this is not possible, we can usually manufacture these ourselves with our machines in our workshop.

Camfil provides a wide range of high-quality filter cartridges and filter plates to retrofit the most common dust collectors on the market. Our offering include various types and sizes of filter elements as well as filter media with different properties.

Rewigo, premium label from Laskar Puntlastechniek, takes resistance welding to new heights. These high-tech spot welding machines are equipped with inverter technology and a dynamic working mode to perfectly match the unique needs of each customer. The NFC tag allows specific user rights to be assigned, allowing both novice and experienced users and adjusters to take full advantage of this technology.

We go for the innovative solution to your problem. We think along with you, so that together we can achieve the best result. We supply all-in-one welding robot systems, but above all we offer solutions! Our solution consists of three components: the robot, the construction and a software package. Everything from one source and the ideal total solution for your company.

When adjusting a machine, a shaft or spindle is usually used. It is essential to know the position of this spindle to ensure that the machine is adjusted correctly. Where in the past a tape measure or slide gauge was used to determine the correct displacement, we now use position indicators and clock counters, also called counters. An indicator ensures that the adjustment of a machine becomes easier, faster and more accurate.

The RS abrasive removal system, equipped with a single filter, consists of a special suction and pressure pipe system, which is fitted with a number of inlet and outlet nozzles mounted in the water tank of the cutting table. The size of the water tank determines the number of inlet and outlet nozzles. For larger water tanks, the inlet and outlet nozzles are automatically controlled per section by means of a pneumatic valve system. The water/abrasive mixture pumped out of the water tank is collected in a free-standing separation unit equipped with a filter (known as a Big Bag). The used abrasive sand is sucked out of the water tank and pumped to the RS system. In the RS3 system, the sand settles in a big bag and the remaining water is pumped back to the water tank. The RS3 system is switched on and off and adjusted from the control console. The Big-Bag filter can be easily removed from the separation unit. Optional on all ACM series machines Reduces downtime to a minimum Reduces the need for tank cleaning Optimal distance The maximum distance between the connection points of the cutting table and the RS3 separation unit is approx. 6 metres. This distance is necessary to ensure optimal operation.

First at Andes Meettechniek: Wireless 3D Scanning! Andes Meettechniek BV, a specialist in geometric measurement technology and 3D scanning, offers an advanced solution for companies looking for accurate and efficient digital measurements with the SCANTECH3D wireless scanners in combination with PolyWorks software. The wireless SCANTECH3D scanners make it possible to capture objects quickly and in detail in 3D without the limitations of cables. This technology offers unprecedented flexibility, especially for applications in mechanical engineering, the aerospace industry and architecture, where detailed measurements are essential and cables often form an obstacle in the workspace. The integration of SCANTECH3D scanners with PolyWorks software enables Andes Meettechniek BV to work with reliable, powerful tools that not only collect data quickly, but also process and analyze it accurately. PolyWorks offers possibilities for metrology, quality control and reverse engineering, with which users can create detailed digital models and compare them directly with original designs or specifications. This ensures a more efficient production process and helps companies to prevent errors, save time and improve the quality of their products. By working with Andes Meettechniek BV, customers benefit from the expertise of a specialist in measurement technology, combined with the latest wireless SCANTECH3D scanners and the advanced software of PolyWorks. This combination ensures that companies can work quickly and with high precision, without compromising the quality of their measurements. Whether it is inspecting complex parts or performing reverse engineering, the solution that Andes Meettechniek BV offers is ideal for companies looking for reliable and efficient measurement and scanning technologies that increase productivity and reduce costs.

SCHECHTL is known for its motorized folding machines and guillotine shears. SCHECTL offers a wide range of different types of machines: - Segment folding machines - Manual folding machines - Guillotine shears - Motorized and CNC controlled folding machines Consult one of our specialists for more information.

An addition on the JÖRG machines for insulation industry