Welding Week Nederland 2024 – Nil Verbindingsweek

3M speedglas

**3M Speedglas Welding Helmets for Optimal Eye Protection at Lascentrum** Are you looking to protect your eyes effectively during welding tasks? Discover the high-quality 3M Speedglas welding helmets at Lascentrum. Welding and cutting work involve potentially hazardous light radiation, such as ultraviolet and infrared rays, which can cause serious eye injuries like welders’ eye. Fortunately, […]

ArcNC voor ABB lasrobots

BARRACUDA 45i-125i

Compact, efficient and powerful: The new BARRACUDA 45i-125i. Mobility, maximum efficiency and excellent cutting quality are particular features of the REHM plasma cutting machines. The new compact BARRACUDA is available in two sizes and four performance classes. Large power components and 100% tested quality guarantee the reliability of the BARRACUDA in the demanding conditions found […]

Bevel machines

Bike inspection robot

BOOSTER.PRO 230

Electrode welding for professionals: The BOOSTER.PRO 230 the lightweight with only 6.7 kg in the proven TIGER design. The electrode welding machine for professionals – with a new, expanded range of functions. – Fully digital technology – Energy cost saving IMS-inverter technology with PFC – Maximum mobility due to light weight – Suitable for generators […]

Bug-O / Railsystems

A small selection from our range: 1. GO-FER III The three different GO-FER kits are carefully composed for specific processes and offer affordable solutions for welding or cutting, both oxy-fuel and plasma. The kits come complete with drive unit, torch holder, 2.37 meter rail and accompanying magnets. Vacuum cups for non-magnetizing material and other options […]

Bug-O / Snijden

Om een beeld te geven van ons assortiment zullen we hieronder enkele producten toelichten, voor meer informatie kunt u contact met ons opnemen. DC IV De DC IV heeft een dubbel snelheidsbereik voor lassen en snijden omdat gekozen kan worden uit twee soorten tandwieloverbrenging. Omdat ook de motoroverbrenging in drie varianten verkrijgbaar is, is de […]

Bug-O / submerged

CW-7 Pipe Welding Machine The CW-7A welding machine is suitable for submerged arc welding of nozzles in barrels. The machine is equipped as shown and can carry up to 27 kg. (60 lbs.) on welding wire. The unit is complete with wire feeder, torch and cabling. The CW-7 is attached with a 3-claw mandrell.

Buizen zaagmachies

Bymat lasnaadreinigers

Bymat stainless steel Cleaning & Embossing machines and consumables are available from De Vlamboog. Complete and actual documentation will be supplied on request.

Ca-Zoom PTZ inspection camera

Cantilever Welding Screen

Our cantilever welding screen is ideal for small, medium, and large companies that perform manual or robotic welding. What makes this product unique is its ability to create a free span of up to 7 meters without an overhead beam. This ensures unrestricted access for forklifts and overhead cranes. The automatic welding screen can be […]

CC-GRIND-ROBUST

With the CC-GRIND-ROBUST, PFERD offers a modern, high-performance and ergonomic alternative to grinding wheels, POLIFAN flap discs and fibre discs. Advantages: – the fastes work progress due to highly aggressive abrasive; – fibre glass backing support guarantees durable and safe use; – significantly more ergonomic than a conventional grinding wheel, noise, vibrations and dust are […]

CC-GRIND-SOLID

With the CC-GRIND-SOLID, PFERD offers a modern, high-performance and ergonomic alternative to conventional grinding wheels. Advantages: – the fastest work progress due to highly aggressive abrasive; – significantly more ergonomic than a conventional grinding wheel: noise and vibrations are reduced by 50%, dust by 80%; – layered structure of the glass fibre backing pad guarantees […]

CLINOX ECO X2 TIG weld Cleaning AC/DC 30Amps

Simple, yet very efficient, thanks to the patented manual pumping torch. The 30amps offer the power need to clean any TIG welds, while the inverter grants the control you need to avoid damaging your parts.

Clinox Power X2 TIG, MIG Weld Cleaner AC/DC 50amps

Clinox Power X2 with its 50amps power output allows to efficiently make pickling and passivation on TIG and MIG welds. With the DC function you can also electropolish the welding seem, making it shiny as the rest of the surface. Also capable of both black and white marking

CLINOX PRO X2 TIG WELD CLEANING AC/DC 30Amps

The evolution of TIG CLINOX PRO, our best seller for over 25 years! We have doubled the power output, to offer you better performance, while keeping the features that made it unique, such as: automatic chemical supply and fumes extraction.

CLINOX SURFACE PLUS X2 – Environmentally Safe Stainless Steel Surface Cleaning

The best solution to do pickling and passivation on large stainless steel surfaces. Forget about toxic chemicals. Forget about wasting time and money on external services. Thanks to SURFACE PLUS you can easily get perfectly clean and passive stainless steel surfaces without the need of dangerous and toxic solutions!

CLINOX SURFACE X2 Stainless Steel Surface and Weld Cleaner AC/DC 100Amps

The strongest inverter electrochemical weld cleaner, you can clean TIG, MIG, ELECTRODE, STICK and any other kind of welding. Also suitable for stainless steel surface cleaning. AC/DC for pickling and polishing, 100amps for top performance and white and black marking option

Cobot arm UR10e with welding fume extraction torch

The cobot arm from Universal Robots (UR) is perfect for welding. Our technicians connect it to any welding machine and make it plug-and-play ready for your welding workplace. From a simple basic set to a complicated tailor-made project. Nothing is too crazy for us. Elektrolas is a Certified System Integrator of Universal Robots.

Cobot lassen

Cobot track: Ellas TRACK Pro

A cobot track is a rail system that allows the cobot to move smoothly and safely over a certain distance. This system increases the range of your cobot, allowing it to operate larger or multiple workstations and perform more complex tasks. The Ellas TRACK Pro is the most secure cobot track. The only track with […]

COBOT WK 12

Do you want to simplify your production process? This is possible with the TLS cobot system. One of the great advantages of this cobot, is that it can be connected to any mig/tig machine, making the investment low, but increasing productivity. In the manufacturing industry, there is an increasing demand for the automation and robotization […]

COMBICLICK

The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system as the back of the tool. With the backing pad, COMBICLICK tools can be used on commercially available angle grinders. The special geometry of the cooling slots ensures high air throughput, which in turn considerably reduces the thermal load on […]

COMBITWIST

PFERD industrial power brushes meet a high standard of quality and safety, which is constantly monitored and further developed in our own laboratories. As one of the leading manufacturers of brush tools, PFERD fulfils the requirements of European standard EN 1083. The brushes are deliverable in several wire qualities. With the special wiring COMBITWIST an […]

Constructiewerk

Cutting table Weldkar Pro1570 CNC Plasma

The Weldkar CNC Plasma Cutting Table is the most user-friendly cutting table on the market and is packed with features to make cutting parts easier. With clear, uncluttered graphics, large user-friendly buttons and a touchscreen interface, the Weldkar cutting table is easy to use and operate. Looking for a larger cutting table? In addition to […]

Ejendals Tegera

Behendige en duurzame handschoen voor vochtige omgevingen. Coating met een mix van nitrielschuim/aqua PU voor een uitstekende grip bij droge en licht vochtige oppervlakken. De mix van PU en nitriel zorgt voor een uitstekende grip bij droge en licht vochtige oppervlakken. Ruime keuze in maten, dus voor ieder handschoenen met de perfecte pasvorm. DMF-vrij & […]

ELEKTROPHYSIK MINITEST 2500-4500

The MiniTest 2500-4500 coating thickness gauges stand for high measurement accuracy and repeatability. A wide range of wear-resistant probes, different calibration methods and evaluation options make these coating thickness gauges suitable for a wide variety of coating measurement applications, even in the most demanding environments. All probes are equipped with wear resistant poles ensuring long […]

ELMED ISOTEST INSPECT

The non-destructive holiday detection of coatings with high voltage allows the detection of even smallest pinholes. Equipped with cutting-edge high voltage technology the ELMED ISOTEST® holiday detector is an indispensable assistant in passive corrosion protection. ELMED ISOTEST stands for efficient and reliable porosity testing with minimal material stress of the coating. Non-conductive coatings and coverings […]

EVEREST MENTOR FLEX

EVEREST MENTOR VISUAL iQ+

The MENTOR you know. PLUS a whole lot more. • Automatic backup to the cloud. • Effortless inspection reports. • Identify and classify defects in real time. • 2x more processing power. • More sensitive steering. • Improved probability of detection. • TrueSight™ provides high-definition live and still images. • Advanced measurement possibilities. • Interchangeable […]

Everest Mentor Visual iQ+

EWM XQ welding machines

A completely new welding experience with EWM’s new XQ machine line. Interactive. Robust in use. Sophisticated housing. Revolutionary in control. And incredibly powerful. The new Tetrix XQ series TIG devices score high marks in a wide range of applications with different materials. These devices make assembly, maintenance and repair easy in both manual and automatic […]

Exotic Metal Welding at Oostendorp Apparatenbouw – From Titanium to Nickel Alloys

At Oostendorp, we specialize in welding exotic metals such as titanium and nickel alloys, which require a high level of craftsmanship and technological knowledge. These materials, which are widely used in sectors such as aerospace, chemical processing and offshore industries, have unique properties that pose specific challenges during the welding process. They are susceptible to […]

Exposant 1

First Aid Burn Kit

A mobile first-aid kit to grab immediately in case of burns. The Burn Gel products provide cooling and pain relief for first- and second-degree burns. With burn compresses in 3 different sizes including a large 30×40 cm compress/face mask. Transparent fold-out plastic bags give a clear overview of the contents. Fits workplaces with a high […]

FOCUS.ARC P 300-450 WS

Technology you can count on – robust, durable and state of the art! Made in Germany by REHM. The FOCUS.ARC P. The revolution in welding technology. The digital operating system SIRIUS and the fully digitally controlled welding process FOCUS.ARC provides advantages that secure your competitiveness. – Faster: Increased revenue of up to 50 % – […]

FOERSTER DEFECTOMETER 1.837

The DEFECTOMETER M 1.837 is a modern eddy current testing device for manual crack detection with a very high sensitivity. In addition, it can also be used for simple hardness testing and material sorting. It has automatic lift, zero and wobble compensation and error resolution from as little as 20 µm and a wide range […]

FOERSTER SIGMATEST 2.070

FOERSTER SONODUR 3

The mobile and robust SonoDur3 hardness tester offers you the possibility of quickly and precisely carrying out reliable and stable hardness measurements according to the UCI principle (Ultrasonic Contact Impedance) with a Vickers diamond and according to the REBOUND principle (Leeb hardness). This lightweight, compact and easy to use hardness tester is suitable for a […]

Fronius DynamicWire

The innovative advantage of Fronius TIG DynamicWire, when compared to a conventional continuous wire feed in cold wire systems, lies in its automatic self-regulation. The power source actively adjusts the wire speed to the welding behavior, torch position, and current conditions, even compensating automatically for component tolerances of up to 30%. The result? Perfect welds […]

Gassen voor lassen en snijden

Zaken die heel normaal lijken, hebben onbewust een complete geschiedenis. Denk aan een voetbalstadion, winkelcentrum of bedrijfshal. In veel gevallen, grote stalen constructies die het dak en gebouw compleet maken. Voordat het zover is, gaat hier een complete geschiedenis aan vooraf. De constructies worden door vakmensen met veel expertise in elkaar gezet, lassen en de […]

Goederenliften

Gofa Arc

Hand laser welding: the future of joining!

What is manual laser welding? Manual laser welding is a welding method in which MIG/MAG welding material is welded by means of an intense infrared laser beam. This method is very effective and fast and can be used for welding steel, stainless steel and aluminum sheet metal. The weld made in manual laser welding is […]

helix pure air

The slide-up welding helmets for the very toughest working conditions. The fully integrated slide-up welding helmet with internal glare protection and super-compact dimensions at minimal weight. Equipped with adaptive ShadeTronic® technology, XXL panoramic field of vision, IsoFit® headband and the new optrel hardHat industrial safety helmet. Benefit from peak performance even in the most challenging […]

Helvi

Lascentrum has added Helvi, the reliable partner in industrial welding equipment, to its assortment due to the brand’s outstanding reputation and reliability. Since 1975, Helvi has been producing high-quality industrial welding machines, plasma cutting machines, and professional battery chargers. Helvi is known for its commitment to quality and innovation. The machines are meticulously designed and […]

High Speed Disc ALUMASTER

The innovative ALUMASTER High Speed Disc is a unique tool with an extremely high stock removal rate which has been developed especially for use on angle grinders. It is ideal for processing aluminium as it does not generate hazardous or explosive dust. It consists of ten specially developed tungsten carbide cutting inserts, which are fixed […]

Hyundai Welding

HYUNDAI WELDING is the world leader in the production of welding consumables. The welding consumables are of exceptional quality and have all approvals such as ABS, BV, DNV, LR, GL and TÜV

Innovation in Welding Qualifications – A Head Start at Oostendorp

At Oostendorp, we see welding qualifications not just as a proof of craftsmanship, but as a foundation to build on. Where for many it is an end goal, we see it as a starting point. We differentiate ourselves by not only meeting the standard, but continually exceeding it. With our extensive qualifications, we cover a […]

Innovative option DMS (data software management)

An important innovation on our Rewigo spot welding machines is the DMS option (data software management). With this option it is possible to save data. It is also possible to create welding programs and program runs. This also remotely. We will also demonstrate this possibility during the Welding Week.

Inverter WK Plasma 4060 – 230 Volt incl. EMC / PFC

This Weldkar WK Plasma 4060 PFC is extremely suitable for cutting work on site, but of course also in the workshop, due to its handy and portable design. With its power of 40 amps at 230 volts, this machine has a maximum cutting capacity of 15 mm in steel. Due to the advanced inverter technology, […]

INVERTIG i 260 DC-450 AC/DC HIGH

Simple, energy-efficient TIG welding: INVERTIG i 260-450 DC and AC/DC HIGH. The HIGH series impresses with its ease of use and the best energy efficiency as well as a large number of welding processes, in which all the know-how and experience of us as a technology leader in the TIG area is invested. The INVERTIG […]

Jasic Laser lassen

Kemper ProfiMaster

The ProfiMaster is a welding fume filter unit of robust quality for occasional and/or regular welding. The disposable filters have a high welding fume intake capacity, which can be easily changed. The easily positionable extraction arm has an action radius of 360 degrees. Thanks to the shape of the extractor, welding fumes from the welding […]

Kemppi FastMig X

* Powerful solution for multiple processes: MIG, 1-MIG, Pulse MIG, MMA, TIG * Arc Mobile Control provides a flexible way to use and manage the welding machine * WiseRoot+ for optimized root layer welding. * WiseThin+ for optimized thin plate and position welding: Mixed gas and cheaper CO2 shielding gas * Precise arc voltage function: […]

Kemppi MIG X8

The X8 MIG delivers performance that puts other machines to shame. Consider welding performance , user experience and welding management. With its focused and intense welding arc, unmatched ease of use, upgradeable power source, digital WPS and full integration with the WeldEye management system, the X8 MIG Welder allows companies to perform, regulate and manage […]

Kennissessie

Koweld

As a leading Dutch wholesaler in welding and cutting products, we strive to provide our customers with high-quality equipment and support that enables them to excel in their field. One of our proud partners in this pursuit of excellence is Koweld, a renowned manufacturer of welding machines. Let’s take a closer look at why we […]

KRAUTKRÄMER USM 100

Krautkrämer USM 100 is a revolutionary universal ultrasonic flaw detector that simplifies your inspections, so you can make informed decisions faster. Superior inspection results, a first-class user interface, great ergonomics and robust design, unparalleled connectivity and reporting capabilities, etc. … make the Krautkrämer USM 100 the most versatile portable ultrasonic flaw detector on the market. […]

KRAUTKRÄMER USM 36

The Krautkrämer USM 36 is an ultra-reliable portable ultrasonic flaw detector for precise results under any conditions. Because of its large 7-inch screen, with an 800×480 pixel resolution it has the largest viewable A-Scan Display in its Class. Signals can be easily viewed and accurately interpreted, even in bright sunlight. The Krautkrämer USM 36 uses […]

Lascentrum Welding and Cutting

Lascentrum’s Own Brand Products Why choose our own brand products? At Lascentrum Welding and Cutting, we take pride in our own brand product line. Each product is developed with the highest standards of quality and reliability in mind. Whether you’re a beginner or a seasoned professional, our products are carefully designed and manufactured to meet […]

Laser lashelm Univet Mastr

First laser welding helmet with CE approval! The Univet “MASTR” laser welding helmet is specially designed to provide protection from the scattered and diffuse light generated during welding processes with handheld laser systems. Product Description This complete solution consists of a helmet shell made of special composite material, a laser protection filter and a welding […]

Lorch Lasapparatuur

Maatwerk Machinebouw

Magswitch – Automation

The CoBot SmartMagGrip E30 is designed specifically to work well in the collaborative robot environment. It incorporates all of the same features as a typical Magswitch E-Series tool, including Variable Field Output (VFO) and integrated sensing technology. The CoBot SmartMagGrip E30 is currently supported with direct integration to Universal Robots through the Tool IO connector […]

Magswitch – Hand Lifters

This “Worlds First” electrically switchable Magswitch Hand Lifter offers the perfect solution for handling low-weight steel products. There is no longer a need to move sharp, hot or dirty steel by hand. The Hand Lifter is lightweight, electrically operated and extremely strong. For safety reasons, a 106 kg magnet is used to safely lift up […]

Magswitch – Heavy Lifting

Magswitch LAY series magnets use different size magnets to achieve different depths of field. This allows for greater workloads and greater control over larger workpieces. The MLAY1000x4 is a lightweight heavy duty lifting magnet ideal for lifting thick plates, beams, pipes and performs well on air gaps such as rust and dirt. It has a […]

Magswitch – Lasmagneten

Below you will find a small selection from our range of welding magnets, more information can be found on our website or via the contact form. Ground Clamp Magswitch On/Off switchable ground clamps allow the welder to quickly place a ground clamp, weld the product and make the next weld connection. Place the ground terminal […]

Magswitch – Shipbuilding

Beam Jack The Magswitch 1.5 Ton Beam Jack is perfectly suited for pulling ferrous steel flat against stiffening beams, eliminating air gaps to allow for more efficient welding. It significantly reduces the welding time and ensures that extra welding jigs are hardly needed anymore. Mag Press The Magswitch Mag Press provides an easy way to […]

Manufacturing Services

VDL Steelweld has been active in engineering and supplying all kinds of equipment and machines to OEM’s throughout the years. We design and manufacture products and systems to customer specifications, ranging from all kinds of specialty vehicles, through specialised conveyor systems up to large and heavy welded constructions, e.g. for applications in the field of […]

MasterMIG 355 Kemppi

Kemppi’s MasterMig 355 is out (the premium compact MIG series). This welding machine has high availability for manual, synergic and Pulse MIG welding. The MasterMig takes industrial welding performance to the next level. Digital arc control, fast setup techniques and an excellent power-to-weight ratio create a new standard for welding quality and efficiency at work. […]

Micro spot welding machines

Laskar Puntlastechniek and Soudax work together in the field of micro spot welding in the Netherlands and Belgium. The micro spot welding machines are designed for applications where extremely small and delicate spot welds are required. These machines deliver exceptional precision and control, which is essential for sectors such as the electronics industry and medical […]

MIGZONE AiR WeldGuard series MIG/MAG smoke extraction torch

The compact, ergonomic MIG/MAG smoke extraction torch from the MIGZONE AiR WeldGuard series is the perfect solution for welders who prioritize efficiency, comfort, and safety. Its streamlined design and ergonomic construction allow for effortless handling and precise control during the welding process. Thanks to its effective smoke extraction system, the MIGZONE AiR WeldGuard torch minimizes […]

Mobile boring & overlay welding machines

Modular Welding Robot

Our modular robot offers the perfect solution, especially for small and medium-sized welding companies that are uncertain about their future production needs. It can be challenging to make the right decision when purchasing a robot installation, which often leads to delays. We simplify that decision by developing the most modular robot, which can be expanded […]

Multi C’Air IV

The Multi C’Air IV filters the air supply to the helmet. The battery lasts for 8 hours and vibration and sound signals alert the user when the filters become saturated. Air flow: 180 / 200 / 220 L per min Noise level: 68 dB Alarm: Visual / audio / vibration Filter: P R SL Battery […]

Multi Vision ClearView

New in the Multi Vision range is the ClearView. A fresh-air grinding screen with a large visor with a 180x160mm field of view and it weighs only 370 grams. The ClearView can be used in combination with the Multi C’Air IV fresh air system. Field of view dimensions: 180 x 160 mm Weight: Approx. 370 […]

Multi Vision Grind

Another helmet in Multi Vision’s current line is the Multi Vision Grind. This helmet is designed with your safety and comfort in mind. The helmet features an ADF, which does not obstruct vision while providing protection from grinding dust and particles. See full product information in the table below. Filter cassette size: 110 x 90 […]

Multi Vision Hybrid

The Multi Vision Hybrid is a hybrid model that allows both welding and grinding. Partly for this reason, the welding helmet is excellent for demanding welding and grinding processes. The design of the Multi Vision welding helmet provides optimum protection for the face, neck, ears and chest against flying welding spatter and heat radiation. See […]

Nieuwe Orbitaal laskop OWX

NIL | BIL Lassymposium 2024

On October 1 and 2, 2024, Evenementenhal Gorinchem will open its doors for the NIL | BIL Lassymposium 2024. This knowledge event will focus on recent changes in regulations, welding process developments and special designs.

Optrel Swiss Air

Onlangs heeft Optrel de revolutionaire Swiss Air gelanceerd. Dit is een nieuw type aanblaassysteem dat (onder andere) kan worden gebruikt onder de lashelm. Niet alleen van Optrel maar ook van concurrerende merken. Door de Swiss Air is er geen verse lucht helm nodig waardoor hier ook kan worden bespaard. Het aanblaassysteem is TH3 gekeurd.

Oranje boven met de Weldkar OrangeOne

Are you that welder who supports the Dutch national team through thick and thin? Then this welding helmet is a must-have. This welding helmet is fast, reliable and has a unique design, especially designed to protect the welding Orange fans. The OrangeOne is suitable for all welding processes, including TIG welding. The helmet features 2 […]

Orbital welding

Orbitalum orbital enclosed weldhead

Orbital Welding equipment

Orbital welding powersource 180SW

panoramaxx laser series (hybrid/CLT)

Discover the new panoramaxx laser series helmets for laser welding at our stand! – Panoramaxx Hybrid – Panoramaxx Hybrid CLT

Pelox pickling products

Personal protection / Eye and face protection / Welding helmet Airforce 980-S TH3PSL Welding helmet Airforce 980-S TH3PSL

We introduce the AirForce 980-S welding helmet with fresh air system. This high-quality set is comfortable and suitable for daily use. The set consists of: – Helmet XXL cassette (large field of vision 98x88mm) – NC (natural color) technology – Adjustable 5-8 and 9-13 – Equipped with grinding, sensitivity and delay mode – Extra set […]

PFERD EFFICIENCY

PFERDEFFICIENCY® – Efficiency is the focus of all work processes. It ensues from cost savings on the one hand and productivity increases on the other. Against this background, users are daily challenged with completing their tasks in a fast and effective manner and with the best results. The efficiency of the tools used arises not […]

PFERD ERGONOMICS

The optimization of work processes through the use of powerful premium tools and tool drives has a positive effect on the cost-effectiveness of your operations. In the long term, to be cost-effective is to be sustainable. PFERDERGONOMICS®: Ergonomics is an important aspect of occupational health. The aim is to organize working conditions in such a […]

POLIFAN CURVE flap discs

Production Systems

VDL Steelweld has supported companies around the globe in developing automated production lines for over 50 years. Originating in the Body-in-White business, VDL Steelweld has built numerous lines for their well-known customers such as Jaguar Land Rover, Volvo, Ford and BMW. The goal for these customers is and will always be to produce their new […]

Products, Brands and Services

Profile cutting robot 2×12000

Pulsed MIG/MAG Welding – Precision and Efficiency at Oostendorp

At Oostendorp Apparatenbouw we use the pulsed MIG/MAG welding process as an essential part of our work for welding both carbon steel and stainless steel. This method offers precise control of heat input, which is crucial for sensitive materials and complex welds. The pulsed MIG/MAG process is particularly suitable for work that requires both speed […]

Ready Robotic System

ReadyRoboticCell R300

Kant-en-klare ReadyRoboticCell voor kleine tot middelgrote producten. Door de slimme voordraaitafel hoeft de operator geen grote afstanden afleggen en is de inschakelduur optimaal! De ideale lasrobot voor MKB Nederland. De RRC kent een modulaire opbouw, en is hierdoor aanpasbaar aan uw wensen! Inspanbereik tot 4000mm.

Real-time correction of seam shape at irregular pre-openings

As long as parts fit perfectly together, gas cap and wire searching (Quick-Touch) are sufficient to measure deviations in the position of the weld seam so that the robot can automatically adjust it in the welding program. However, with V-, I- and raised welds, irregular pre-openings and deformations due to shrinkage or heat input, it […]

REWIGO spot welding machine

Rewigo, premium label from Laskar Puntlastechniek, takes resistance welding to new heights. These high-tech spot welding machines are equipped with inverter technology and a dynamic working mode to perfectly match the unique needs of each customer. The NFC tag allows specific user rights to be assigned, allowing both novice and experienced users and adjusters to […]

Robotisering

Scan & Go 1

Service en onderhoud

Slim malwisselsysteem

Slimmalwisselsysteem Snel en simpel een malwissel doorvoeren doe je met het slimme malwisselsysteem van RobWelding. Veel maakbedrijven hikken tegen omsteltijden van de lasrobot aan. Vaak dient ook het lasprogramma nagelopen te worden, waardoor bedrijven het niet zinvol vinden om kleine series met de robot te doen. Met het slimme mal wisselsysteem wissel je de opspantafel […]

SmartFil Extraction Filter Unit

SmartFil is a mobile welding fume filtering unit for regular use in welding with medium amounts of fumes and dust. The disposable filter of the extraction unit has a particularly high filter surface of 25 m² and is changed completely contamination-free when saturated. SmartFil effectively protects the user from welding fumes and is particularly economical […]

Sorteersystemen

SREM FLUXO MT

SREM FLUXO PT

With its FLUXO range, SREM Technologies offers a complete range of penetrating products, available in aerosol cans or in bulk packaging. Our range of FLUXO penetrants has been developed with the aim of being able to handle just about any application under the most diverse conditions. Cold (10°C and less), super polished and even very […]

Stronghand Tools

Strong Hand Tools, founded in the United States in 1983, has grown into a leading manufacturer of hand tools. With nearly 200 employees worldwide, almost half of whom are based at our headquarters in Los Angeles, we are committed to delivering high-quality products to our customers. We started with the idea of providing unique clamping […]

Stud welding machine with cobot integration

Laskar Puntlastechniek will present one of their stud welding machines integrated with a cobot. This combination offers an automated solution for stud welding, with the cobot ensuring precision and repeatability. This integration reduces the chance of human error and increases productivity, making it a valuable addition to modern production environments.

Submerged Arc Welding (SAW) – Maximum Strength and Durability at Oostendorp

At Oostendorp, we use the Submerged Arc Welding (SAW) process as the solution for heavy industrial applications, such as welding large steel structures and pipes. SAW offers us exceptional depth penetration and weld integrity, which is crucial when working with thick materials such as carbon steel and low-alloy steel. What makes SAW so powerful is […]

swiss air TH3/TM3

The revolutionary TH3/TM3 PAPR from optrel. Welcome to the Swiss Alps. Welcome to optrel swiss air. Breathing means life. The optrel swiss air breathing protection system brings clean breathing air into your environment and lets you breathe as freely as you can otherwise only enjoy outdoors in nature. Many workplaces and public spaces generate pollutant […]

SYNERGIC.ARC 304-504 WS | 251-351

MIG / MAG-welding with the best in its class! The new SYNERGIC.ARC series. Find the right performance class for you and experience the best heavy duty machines for MIG / MAG welding. The SYNERGIC.ARC convinces with its robustness and durability as well as perfect welding results and easy operation! SYNERGIC.ARC 304-504 WS – Heavy duty […]

T-Skills – Hét scholierenmagazine

Met het unieke scholierenmagazine T-Skills creëert Vraag&Aanbod samen met maakbedrijven en organisaties een bijzonder product om VMBO/ MBO scholieren te laten zien hoe uitdagend en interessant werken in de techniek kan zijn en welke bedrijven er in de regio actief zijn.

TC burrs for high-performance applications – INOX cut

With the INOX cut, PFERD has

TC burrs for high-performance applications – STEEL cut

With the innovative STEEL cut, PFERD has developed unique burrs for working with steel and cast steel. They are characterized by significantly increased aggressiveness and good guidance. Thus they ensure safe and precise work. The extremely high stock removal rate makes burrs with the STEEL cut impressive, with significant time savings and a high economic […]

TC burrs for high-performance applications ALLROUND cut

With the innovative ALLROUND cut, PFERD has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30% higher for steel. […]

TC burrs for high-performance applications ALU

When it comes to machining aluminium PFERD offers two high-performance cuts and a HICOAT coating which have been designed specifically for demanding machining tasks on long-chipping an lubricating materials. Extremely high stock removal rate. Large chips.

Tecna spot welding machines

During Welding Week, Laskar Puntlastechniek will demonstrate various spot welding machines from Tecna, which have guaranteed reliable connections for years. From stationary machines to spot welding tongs and table top spot welding machines, Tecna offers an extensive range to meet the needs of diverse customers.

The Art of Welding Heat Exchanger Tubes with TIG

At Oostendorp, we know that welding heat exchanger tubes is a challenging task that requires precision and expertise. For this delicate work, we use the TIG method (Gas Tungsten Arc Welding), which not only offers the highest quality, but also ensures precise control of the welding process. This is essential when welding thin-walled and heat-sensitive […]

TigBrush Weldcleaning

TIGER digital 182/230 DC and AC/DC

The benchmark in the TIG compact class: TIGER digital. Thanks to the record-breaking lightweight, the primary TIG inverter is ideal for portable use. The integrated process options, ranging from the HYPER.SPOT to REHM 17.5 kHz HYPER.PULS process, are the benchmark in the TIG compact class. The TIGER® is available in DC and AC/DC as well […]

Transportsystemen

Onze transportsystemen verbeteren uw logistiek! Ze automatiseren en stroomlijnen de goederenstroom voor maximale efficiëntie en betrouwbaarheid, van ontwerp tot implementatie

verbindingstechnieken. LASTECHNIEK is onafhankelijk, toegankelijk, helder en deskundig

VICTOGRAIN

VICTOGRAIN is the most powerful and effective abrasive grain, which is available on the market at the moment. PFERD’s triangular, precision-formed abrasive grain achieves uniquely high abrasive performance. The VICTOGRAIN abrasive grain triangles are identical in shape and size and their cutting edges are applied to the workpiece at the optimim angle, meaning the grain […]

Vraag&Aanbod

Vraag&Aanbod is the only journalistic information source that has been covering and reaching all sectors in the manufacturing industry for over 127 years. All this knowledge is compiled on the website and in a magazine published 10 times a year. Vraag&Aanbod supports entrepreneurs and their employees with practical, to-the-point information that informs, supports, and connects […]

Vraagenaanbod.nl

Vraagenaanbod.nl dé ontmoetingsplaats voor ondernemers in de maakindustrie. Met: 63.000 pageviews per maand 10.000 nieuwsbriefabonnees (2x per week een nieuwsbrief)

WeCobot

The industry standard for Cobot welding solutions

Welding consumables GMAW solid wire electrode

WDI is producing solid wires for gas metal arc welding (GMAW) and for submerged arc welding (SAW) too, in Germany. With our consumables you can weld the following types of steel • Unalloyed steels • Creep resistant steels • Fine grained steels You can order the wires in all common winding types – B 300 […]

Welding consumables GMAW solid wire electrode

Welding consumables submerged arc wire

Welding consumables submerged arc wire (SAW)

Welding robot on track

Weldkar CNC Plasma Snijtafel

Weldkar CNC Plasma Cutting Table Weldkar CNC Plasma Cutting Table Designed to meet the needs of companies that want to cut small series. This cutting table is the perfect tool for manufacturing companies, educational institutions, designers who want to produce series in-house or make prototypes. The software is designed so that the part to be […]

Weldkar lastafel Ø 28 mm

A welding table, also known as a clamping table, is an indispensable tool for any professional welder. With the clamping table it is possible to clamp weld structures into their final shape, in order to then easily weld them off. Weldkar’s clamping tables are available with bore holes of 28mm diameter. Using the clamping tools […]

Weldkar WK MIG 250 Dual Pulse

With a 250 Amp current source (60% duty cycle), the Weldkar WK MIG 250 Dual Pulse is suitable for industrial use. In continuous operation, the maximum welding current is 195 amps. The WK MIG 250 Dual Pulse is versatile and suitable for both MIG/MAG, TIG (elevator arc) and MMA (electrode) welding. Equipped with various synergic […]

Welducation Simulator

Learning to weld becomes child’s play. Welding without risk: Through Virtual training, complex welding processes can be simulated in a realistic and cost-effective manner without the welder running any risk or wasting valuable materials and raw materials.

WILNOLED UNIVERSAL SERIES II

The new WilnoLED Universal Series II is a more powerful version of the proven WilnoLED Universal X-ray film viewer. The Series II contains a more powerful LED technology, which offers the user a significantly higher luminance as well as improved uniformity in illumination. Optimum cooling and smooth running ensure pleasant and standard-compliant continuous operation. The […]

Opening Hours

Address

Follow us